56 lines
2.1 KiB
Markdown
56 lines
2.1 KiB
Markdown
# Virtual Boy
|
|
|
|
a "portable" video game console made by Nintendo in the '90s.
|
|
|
|
it supposedly was the beginning of virtual reality... nah, instead it failed to sell well because you use it for 15 minutes and then you get a headache.
|
|
|
|
its sound generation chip is called Virtual Sound Unit (VSU), a wavetable chip that is a lot like PC Engine, but unlike that, the waves are twice as tall, it doesn't go too low in terms of frequency (~D-2), and the last channel (yep, it has 6 channels) is a noise one.
|
|
|
|
additionally, channel 5 offers a modulation/sweep unit. the former is similar to FDS' but has much reduced speed control.
|
|
|
|
## effects
|
|
|
|
- `10xx`: **set waveform.**
|
|
- `11xx`: **set noise length.** range is `0` to `7`.
|
|
- only in the noise channel.
|
|
- `12xy`: **setup envelope.**
|
|
- `x` determines whether envelope is enabled or not.
|
|
- `0`: disabled
|
|
- `1`: enabled
|
|
- `3`: enabled and loop
|
|
- yeah, the value `2` isn't useful.
|
|
- `y` sets the speed and direction.
|
|
- `0-7`: down
|
|
- `8-F`: up
|
|
- `13xy`: **setup sweep.**
|
|
- `x` sets the speed.
|
|
- `0` and `8` are "speed 0" - sweep is ineffective.
|
|
- `y` sets the shift (`0` to `7`).
|
|
- `8` and higher will mute the channel.
|
|
- only in channel 5.
|
|
- `14xy`: **setup modulation.**
|
|
- `x` determines whether it's enabled or not.
|
|
- 0: disabled
|
|
- 1: enabled
|
|
- 3: enabled and loop
|
|
- 2 isn't useful here either.
|
|
- `y` sets the speed.
|
|
- `0` and `8` are "speed 0" - modulation is ineffective.
|
|
- no, you can't really do Yamaha FM using this.
|
|
- only in channel 5.
|
|
- `15xx`: **set modulation wave.**
|
|
- `xx` points to a wavetable. range is `0` to `FF`.
|
|
- this is an alternative to setting the modulation wave through the instrument.
|
|
|
|
## info
|
|
|
|
this chip uses the [Virtual Boy](../4-instrument/virtual-boy.md) instrument editor.
|
|
|
|
## chip config
|
|
|
|
the following options are available in the Chip Manager window:
|
|
|
|
- **Waveform storage mode**: selects how will waveforms be loaded.
|
|
- Dynamic: allows switching between many waves, but it is not confirmed whether this really works on hardware.
|
|
- Static: loads the first 5 waves only.
|