fdfbff3999
There are also a couple tiny instances of formatting, like [sic] in the Namco 163 doc (yes, it is now correctly formatted) and a couple labels that needed bold.
44 lines
1.8 KiB
Markdown
44 lines
1.8 KiB
Markdown
# Ensoniq ES5506 instrument editor
|
|
|
|
the ES5506 instrument editor contains three tabs: Sample, ES5506 and Macros.
|
|
|
|
## Sample
|
|
|
|
for sample settings, see [the Sample instrument editor](sample.md).
|
|
|
|
## ES5506
|
|
|
|
ES5506 contains a filter, which is somewhat configurable.
|
|
there's also a hardware envelope, but it's probably most useful for smoothing.
|
|
|
|
you may use this tab to set up ES5506-specific parameters:
|
|
|
|
- **Filter Mode**: sets filter mode.
|
|
- **HP/K2, HP/K2**: run high-pass twice using filter K2.
|
|
- **HP/K2, LP/K1**: run high-pass using filter K2, and then low-pass using filter K1.
|
|
- **LP/K2, LP/K2**: run low-pass twice using filter K2.
|
|
- **LP/K2, LP/K1**: run low-pass using filter K2, and then again using filter K1.
|
|
- **Filter K1**: set coefficient 1 (K1). effectively controls cutoff.
|
|
- **Filter K2**: set coefficient 2 (K2). effectively controls cutoff.
|
|
- **Envelope count**: set length of hardware envelope (it's very short even at highest value).
|
|
- **Left Volume Ramp**: how much to change left volume on every envelope step.
|
|
- **Right Volume Ramp**: how much to change right volume on every envelope step.
|
|
- **Filter K1 Ramp**: how much to change filter K1 every envelope step.
|
|
- **Filter K2 Ramp**: how much to change filter K2 on every envelope step.
|
|
- **K1 Ramp Slowdown**: increases length of K1 ramp.
|
|
- **K2 Ramp Slowdown**: increases length of K2 ramp.
|
|
|
|
## Macros
|
|
|
|
- **Volume**: volume sequence.
|
|
- **Arpeggio**: pitch sequence.
|
|
- **Filter Mode**: sets filter mode.
|
|
- **Panning (left)**: output level for left channel.
|
|
- **Panning (right)**: output level for right channel.
|
|
- **Pitch**: fine pitch.
|
|
- **Phase Reset**: trigger restart of waveform.
|
|
- **Filter K1**: K1 sequence.
|
|
- **Filter K2**: K2 sequence.
|
|
- **Outputs**: ES5506 has 6 stereo output (total 12). select which pair of outputs to use.
|
|
- **Control**: reverse/pause sequence.
|