otomatalabs/furnace
7
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Random documentation details.

Browse source
This commit is contained in:
Electric Keet 2025-03-26 13:38:04 -07:00 committed by tildearrow
parent c9f9cc0d8b
commit a1ee3d2a0d
4 changed files with 16 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
doc/2-interface/settings.md
View file

@ -558,6 +558,11 @@ below all the binds, select a key from the dropdown list to add it. it will appe
- slight performance cost and slightly buggy. - slight performance cost and slightly buggy.
- **Fill entire window**: removes the gap between the waveform and the edge of the window. - **Fill entire window**: removes the gap between the waveform and the edge of the window.
- **Waveform goes out of bounds**: allows the waveform to draw past the top and bottom of the oscilloscope. - **Waveform goes out of bounds**: allows the waveform to draw past the top and bottom of the oscilloscope.
- **Line size**: line thickness.
- **Per-channel oscilloscope threads**: number of CPU threads allocated to handle individual oscilloscopes. a reasonable setting is the total number of available cores minus two.
- **Oscilloscope rendering engine**: chooses which line-drawing method to use.
- **ImGui line plot**: use the UI's native rendering method. default.
- **GLSL (if available)**: render using shaders that run on the graphics card. only available when using the OpenGL 3.0 render backend.
### Song Comments ### Song Comments

4
doc/4-instrument/fm-opz.md
View file

@ -76,7 +76,9 @@ these macros allow you to control several parameters of FM per tick.
- **Algorithm**, - **Algorithm**,
**Feedback**, **Feedback**,
**LFO > Freq**, **LFO > Freq**,
**LFO > Amp**: as described above. **LFO > Amp**,
**LFO2 > Freq**,
**LFO2 > Amp**: as described above.
- **AM Depth**: amplitude modulation depth. - **AM Depth**: amplitude modulation depth.
- **PM Depth**: pitch modulation depth. - **PM Depth**: pitch modulation depth.
- **LFO Speed**: LFO frequency. - **LFO Speed**: LFO frequency.

3
doc/7-systems/wonderswan.md
View file

@ -25,6 +25,7 @@ it has 4 wavetable channels. some of them have additional capabilities:
- 2-3: 200%. - 2-3: 200%.
- 4-7: 400%. - 4-7: 400%.
- 8: 800%. - 8: 800%.
- has no effect when "Headphone output" is on. see "chip config" below.
## info ## info
@ -34,7 +35,7 @@ this chip uses the [WonderSwan](../4-instrument/wonderswan.md) instrument editor
the following option is available in the Chip Manager window: the following option is available in the Chip Manager window:
- **Headphone output**: enables stereo. default is on. - **Headphone output**: enables stereo 16-bit output. if disabled, the internal speaker's 8-bit mono output is used. default is on.
## channel status ## channel status

7
doc/8-advanced/chanosc.md
View file

@ -7,12 +7,17 @@ the "Oscilloscope (per-channel)" window displays several oscilloscope views (one
right-clicking the view will display the configuration view shown above: right-clicking the view will display the configuration view shown above:
- **Columns**: sets the amount of columns for the oscilloscope views. - **Columns**: sets the amount of columns for the oscilloscope views.
- **Size (ms)**: sets how much of a channel's output is captured for the oscilloscope view. - **Size (ms)**: sets how much of a channel's output is captured for the oscilloscope view.
- **Center waveform**: when enabled, the displayed waveforms will be centered using an auto-correlation algorithm.
- **Automatic columns**: sets the number of columns based on the number of channels. - **Automatic columns**: sets the number of columns based on the number of channels.
- **Off**: use the Columns setting. - **Off**: use the Columns setting.
- **Mode 1**: always fewer columns than rows. - **Mode 1**: always fewer columns than rows.
- **Mode 2**: bias slightly toward more columns. - **Mode 2**: bias slightly toward more columns.
- **Mode 3**: always more columns than rows. - **Mode 3**: always more columns than rows.
- **Center waveform**: when enabled, the displayed waveforms will be centered horizontally using an auto-correlation algorithm.
- **Randomize phase on note**
- **DC offset correction**: controls the algorithm that centers the waveform vertically.
- **Off**
- **Normal**
- **High**
- **Amplitude**: scales amplitude for all oscilloscope views. - **Amplitude**: scales amplitude for all oscilloscope views.
- **Line size**: controls line thickness. - **Line size**: controls line thickness.
- **Gradient**: this allows you to use a gradient for determining the waveforms' colors instead of a single color. see the gradient section for more information. - **Gradient**: this allows you to use a gradient for determining the waveforms' colors instead of a single color. see the gradient section for more information.