2022-01-16 01:10:43 -05:00
# Neo Geo/Yamaha YM2610
originally an arcade board, but SNK shortly adapted it to a rather expensive video game console with the world's biggest cartridges because some people liked the system so much they wanted a home version of it.
2022-03-26 14:55:20 -04:00
its soundchip is a 4-in-1: 4ch 4-op FM, YM2149 (AY-3-8910 clone) and 2 different format ADPCM in a single package!
2022-01-16 01:10:43 -05:00
# effects
- `10xy` : set LFO parameters.
- `x` toggles the LFO.
- `y` sets its speed.
- `11xx` : set feedback of channel.
- `12xx` : set operator 1 level.
- `13xx` : set operator 2 level.
- `14xx` : set operator 3 level.
- `15xx` : set operator 4 level.
- `16xy` : set multiplier of operator.
- `x` is the operator (1-4).
- `y` is the mutliplier.
- `18xx` : toggle extended channel 2 mode.
- 0 disables it and 1 enables it.
2022-01-16 01:17:30 -05:00
- only in extended channel 2 system.
2022-01-16 01:10:43 -05:00
- `19xx` : set attack of all operators.
- `1Axx` : set attack of operator 1.
- `1Bxx` : set attack of operator 2.
- `1Cxx` : set attack of operator 3.
- `1Dxx` : set attack of operator 4.
- `20xx` : set SSG channel mode. `xx` may be one of the following:
- `00` : square
- `01` : noise
- `02` : square and noise
2022-01-20 03:23:03 -05:00
- `03` : nothing (apparently)
2022-01-16 01:10:43 -05:00
- `04` : envelope and square
- `05` : envelope and noise
- `06` : envelope and square and noise
- `07` : nothing
- `21xx` : set noise frequency. `xx` is a value between 00 and 1F.
- `22xy` : set envelope mode.
- `x` sets the envelope shape, which may be one of the following:
- `0: \___` decay
- `4: /___` attack once
- `8: \\\\` saw
- `9: \___` decay
- `A: \/\/` inverse obelisco
- `B: \¯¯¯` decay once
- `C: ////` inverse saw
- `D: /¯¯¯` attack
- `E: /\/\` obelisco
- `F: /___` attack once
- if `y` is 1 then the envelope will affect this channel.
- `23xx` : set envelope period low byte.
- `24xx` : set envelope period high byte.
- `25xx` : slide envelope period up.
- `26xx` : slide envelope period down.
2022-01-20 03:23:03 -05:00
- `29xy` : enable SSG auto-envelope mode.
- in this mode the envelope period is set to the channel's notes, multiplied by a fraction.
- `x` is the numerator.
- `y` is the denominator.
2022-03-26 14:55:20 -04:00
- if `x` or `y` are 0 this will disable auto-envelope mode.
2022-05-02 19:15:51 -04:00
- `30xx` : enable envelope hard reset.
- this works by inserting a quick release and tiny delay before a new note.
- `50xy` : set AM of operator.
- `x` is the operator (1-4). a value of 0 means "all operators".
- `y` determines whether AM is on.
- `51xy` set SL of operator.
- `x` is the operator (1-4). a value of 0 means "all operators".
- `y` is the value.
- `52xy` set RR of operator.
- `x` is the operator (1-4). a value of 0 means "all operators".
- `y` is the value.
- `53xy` set DT of operator.
- `x` is the operator (1-4). a value of 0 means "all operators".
- `y` is the value:
- 0: +0
- 1: +1
- 2: +2
- 3: +3
- 4: -0
- 5: -3
- 6: -2
- 7: -1
- `54xy` set RS of operator.
- `x` is the operator (1-4). a value of 0 means "all operators".
- `y` is the value.
- `55xy` set SSG-EG of operator.
- `x` is the operator (1-4). a value of 0 means "all operators".
- `y` is the value (0-8).
- values between 0 and 7 set SSG-EG.
- value 8 disables it.
- `56xx` : set DR of all operators.
- `57xx` : set DR of operator 1.
- `58xx` : set DR of operator 2.
- `59xx` : set DR of operator 3.
- `5Axx` : set DR of operator 4.
- `5Bxx` : set D2R/SR of all operators.
- `5Cxx` : set D2R/SR of operator 1.
- `5Dxx` : set D2R/SR of operator 2.
- `5Exx` : set D2R/SR of operator 3.
- `5Fxx` : set D2R/SR of operator 4.
